Style is what makes each of us unique, makes you, well, you. And the same applies to hardwood flooring.

Knowing the distinct hardwood styles can also help you decide if this floor covering is the solution for the way you live. The answer for your lifestyle.

Considering the vast amount of design options available today with hardwood floors, you can create a look “all your own” that will have lasting beauty and durability.

For example, inserting decorative medallions, running the boards on the diagonal, or creating a border are just some of the design styles one can consider.

But hold on. Before you get to the design, you need to select the type of hardwood that’s right for you and your home.

Today you can choose between a pre-finished hardwood floor and one that is unfinished. Pre-finished hardwood comes ready for installation in your home.

The hardwood boards have already been sanded, stained and finished at the manufacturing plant. In many cases this can provide a harder, better-protected surface.

Pre-finished floors offer a wider variety of wood species and save hours of labor and cleanup. But unfinished wood floors allow you to have a custom job – you choose the wood species and it’s sanded and the stain is applied on site.

With unfinished you also have the chance to level the surface of the entire floor after it has been installed.

You get an extended factory finish warranty with pre-finished floors, but not with most job-site finishes.

To learn more about this, we suggest you go to the hardwood sections How It’s Made and Before You Buy. For more on styles, please read on.

Like real estate, it’s location, location, location.

To begin with, you need to look at where you plan on installing your new wood floor.

There are limitations on where some wood floors can be installed. This is especially true for the 3/4" solid wood floors. Solid hardwood floors are more susceptible to moisture and are generally not recommended for basements, or installing directly onto a concrete slab.

To help you determine where these floors can be installed you need to understand the different grade levels, see the diagram to the left.

The installation method also can determine where the floor can go, so be sure to review the installation methods prior to buying your hardwood floor.

First, gain knowledge about grain.

Hardwood styles are the result of the wood species available. Some of the more common species are red oak, white oak, maple, cherry, white ash, hickory or pecan.

Each species has its own unique graining and texture. The graining on the boards is determined by the way it has been cut.

There are two cutting processes. “Sliced Cut” shows a more uniform pattern, whereas “Rotary Cut” displays a larger and bolder graining pattern.

Next, color your thinking.

Within each species of hardwood you will have a choice of color and finishes. Here’s where it pays to shop carefully.

When selecting a color, choose one that either coordinates or contrasts with your cabinetry and furniture.

Also keep in mind that darker woods tend to be more formal while natural colors are more casual.

You’re not finished yet. You should be aware that there are different types of finishes depending on whether your hardwood floor is pre-finished or job site finished.

In general, lower gloss levels are better suited for active rooms. This is because lower gloss or matte finishes help minimize the appearance of dirt and scratches. Consider the elegant look of the high gloss finish for a more formal décor.

Don’t sweat the upkeep.

The days of having to wax and scrub your hardwood floors are pretty much gone forever. Manufacturers of pre-finished wood floors have developed sophisticated techniques to quickly apply hard, durable, urethane-based finishes right at the factory.

By using ultra violet lights the pre-finished wood planks can have several coats of urethane applied within a matter of a few minutes. This is helping make hardwood floors both more affordable, and much easier to maintain.

Recently, the hardwood flooring manufacturers have begun to add small chips Aluminum Oxide directly to the floor’s finish which dramatically increases the life of the urethane finish.

Protection? Let us coat the ways…

Most factory finished hardwood floors have several coats of finish applied to the wood’s surface. As example, many wood floor companies are applying 6-10 coats of a ultra-violet (UV) cured urethane. This would be extremely difficult for someone to duplicate on a job site finish, not to mention how many days it would take.

This is one of the reasons why many flooring mechanics, flooring retailers, and builders are pushing pre-finished hardwood floors. Instead of taking several days to install and finish a new hardwood floor a pre-finished hardwood floor is generally done in one day.

This does not mean you should wash your floor with a mop, but it does mean these floors won’t watermark like the old waxed hardwood floors. The UV cured urethane wood finishes do make these floors easier to maintain than the old waxed hardwood floors.

The many methods of factory Pre-finished hardwood finishing:

• UV-cured – Factory finishes that are cured with Ultra Violet lights versus heat.
• Polyurethane – A clear, tough and durable finish that is applied as a wear layer.
• Acrylic-urethane – A slightly different chemical make up than Polyurethane with the same benefits.
• hardwood – Advanced technology that allows the use of space-age hardwoods to increase the abrasion resistance of the wear layer.
• Aluminum Oxide – Added to the urethane finish for increased abrasion resistance of the wear layer, which is becoming extremely popular on the better grade wood floors.
• Acrylic Impregnated – Acrylic monomers are injected into the cell structure of the wood to give increased hardness and then finished with a wear layer over the wood.

Job-site hardwood flooring finishing methods are also up to the job.

If you want a custom stained hardwood floor, or a wood floor to match existing trim, than a job-site finish is your answer.

Job-site finish means you start with a bare (unfinished) hardwood floor and than the floor is sanded, stained, and finished in the home. The other advantage of a job-site finish is, if you are concerned with uneven heights between planks, the sanding process will smooth out the floor. Be warned, though, this can be quite a mess and the process does take several days.

Job-site hardwood floor finishing methods include:

• Water Based Urethane – Water is used as part of the chemical make up of the polyurethane finish.
• Solvent Based Urethane – Oil is used as part of the chemical make up of the polyurethane finish.
• Moisture Cured Urethane – A similar chemical make up as solvent based urethanes, but this finish needs the humidity (moisture) in the air to cure.

How wide? You decide.

When shopping for a hardwood floor you will see boards in various sizes.

The narrower board widths are referred to as “strips” and the wider units as “planks”.

You should be aware that board width can visually impact a room.

Narrow width boards will expand a room, while wider boards work well in a larger room or area.

Knowing this can give you an edge. Different hardwood floors have different edges. Hardwood floors come in either a beveled edge, or a square edge. Today, most hardwood floor manufacturers are calling their beveled edge "eased edge" because the tapered edge is dramatically reduced from the old deeply grooved edges.

The beveled edges do serve a purpose. The manufacturer can produce beveled edge planks faster than square edge, which in turn lowers their production costs. Also, a beveled edge floor is more forgiving when installed over irregular subfloors and you don’t have the problem of overwood (uneven plank heights abutting each other).

Here’s a summary of today’s hardwood edge types:

Square Edge:

The edges of all boards meet squarely creating a uniform, smooth surface that blends the floor together from board to board. The overall look of this floor gives a contemporary flair and formal feeling to the room.

Eased Edge:

Each board is just slightly beveled. Some manufacturers add an eased edge to both the length of the planks as well as the end joints. Eased edges are used to help hide minor irregularities, such as uneven plank heights. Eased edge is also called microbeveled edge.

Beveled Edge:

These products have a very distinctive groove in them. Beveled edge planks lend themselves to an informal and country decor. With the urethane finishes applied at the factory today, the beveled edges are sealed completely, making dirt and grit easy to be swept or vacuumed out of the grooves.

It’s not hard to find your floor’s hardness.

Below are listed the relative hardness for numerous wood species used in flooring. These ratings were done using the Janka Hardness Test, which measure the force needed to embed a .444 inch steel ball to half its diameter in a piece of wood.

The higher the number the harder the wood. Although this is one of the best methods to measure the ability of wood species to withstand indentations, it should be used as a general guide when comparing various species of wood flooring.

The construction and finish also play an important role in the durability and ease of maintenance of any wood floor.

Wood Species	Hardness Rating
Douglas Fir	660
Southern Yellow Pine (short leaf)	690
Southern Yellow Pine (Long leaf)	870
Black Cherry	950
Teak	1000
Black Walnut	1010
Heart Pine	1225
Yellow Birch	1260
Red Oak (Northern)	1290
American Beech	1300
Ash	1320
White Oak	1360
Australian Cypress	1375
Hard Maple	1450
Wenge	1620
African Pedauk	1725
Hickory	1820
Pecan	1820
Purpleheart	1860
Jarrah	1910
Merbau	1925
Santos Mahogany	2200
Mesquite	2345
Brazilian Cherry	2350

Pick a style to suit your style.

With all the choices out there, and some smart shopping on your part, you can be confident of finding the hardwood floor that’ll cover your lifestyle easily, beautifully and durably.